- Home
- ▸
- Flow Rate Bucket Test...
The Bucket Test
The flow rate of your watering system is valuable when setting up irrigation. A simple flow rate test is perfect for determining this.
A handy DIY way of checking this is using the Bucket Test method, which can be done with a watch and a bucket, and no complex equipment required.
With the flow rate of your watering system calculated, it is easy to determine the best way to water–for example, what type of popup sprinklers would work best for your lawn, and how many can we use?
This calculator uses the following formula:
Flow rate (L/min) = [Bucket Size (L)] ÷ [Fill time (sec)] × 60 × 0.8
- 60 is to convert the unit to minutes.
- 0.8 refers to a 20% reduction in flow rate to allow for pressure loss in your system. If the bucket test is taken off the main water feed at the correct pressure then this 20% allowance is not necessary.
- Note the time of day you plan to run your irrigation. Water pressure and flow can fluctuate throughout the day, so it is best to time the flow at the same time of day.
- Ensure there is no water running elsewhere on your property.
- Turn on the tap fully without the bucket underneath.*
- Place the bucket under the already running water, and time how long it takes to fill
- Use our handy Bucket Test Flow Rate Calculator to find out the flow rate in L/min (Litres per minute). Note that this calculator already includes the 20% reduction in flow rate as listed above.
Note that the fill time needs to be calculated at full flow and mid-stream, so the bucket must be placed under the tap after it is already running.
For more tips and tricks, check out the #SMARTGARDENER blog, support page, or our YouTube channel. Alternatively, feel free to get in touch with our friendly customer service team.
